Painting Repairs
JOB: PAINT REPAIR AFTER THE INSTALLATION OF 2 COAL UNLOADERS
LOCATION: THE OUTER HARBOUR OF FERROL
PAINT PROCEDURE:
- Washed with high-pressure water to remove any dust and residues
- Shot blasting with grade Sa 2.5 of all damaged areas
- Application of one coat of epoxy primer with a dry film thickness of 70 microns over blasted areas
- Application of one coat of epoxy paint with a dry film thickness of 100 microns
- Application of two coats of finisher with a 2-part polyurethane paint with a dry film thickness of 70 microns